Forum > LCD TV forum

goodmans RF fault

(1/3) > >>

pc:
Hi, I,m a new member asking for advice about the following,
I have a Goodmans LD3266D LCD TV which faulted last night just as the football match started.
The blank TV screen stated "no signal"  so I checked the arial cable at the TV end with my signal test meter and got a 70dB/uV signal strength given as "ok" I swapped the TV over with another TV (small LCD Goodmans) and it worked fine, so the fault appears to be in the TV
I removed the back to check that nothing obvious was amiss and every thing seems fine.so the question is where do I go from here?
Thanks for any assistance
PC

sabre504:
Hi have you tried other connections on the inputs such as scart or s vid , hdmi ?
Paul

sparky:
hi
try freeview box thro scarts and see what happens might need
new software
dave

pc:
Hello Paul (saban) I am back live again. It was the login problem
Just to update the thread having failed to get a signal through the HDMI connection I went into the TV direct with the aerial and got the same "no signal" response. changed the TV over with another one and got a good picture, no signal problem.
I have just tried again with the TV using scart and initially got a "antenna cable short circuit" message but that went off and I got a picture albiet poor sound, changed over to HDMI and picture and sound ok.
There is something wrong as the error message informs me but what would cause that error as I know that the aerial cable is good
Thanks again for the help
PC

pc:
Just a quick update
Turned the TV on after a 30min break and "no signal" error message now on showing in both scart and HDMI connections??
PC

Navigation

[0] Message Index

[#] Next page