Author Topic: Toshiba RD-XV48DT Power Supply Fault (Read 9056 times)

jamiem1987 · « **on:** July 31, 2012,10:33:16 »

Hi guys, got a Toshiba RD-XV48DT DVD/HDD Recorder in at the moment.

See video here.. http://www.youtube.com/watch?v=dAu2xG_loAc&feature=youtu.be

Make sure you turn the sound up loud to hear it.

Basically I get a whiste (as if the transformers not oscillating correctly) and a tick, each time the unit ticks the LED's light up on the unit then die.

I've changed most of the capacitors on the board apart from the 3700uf capactiros, and the main smoothing capactior (none of which were bulging/leaking).

Anyone had this issue before?

Kind regards,
Jamie

Mulja tv repair portal · « **on:** July 31, 2012,10:33:16 »

jordan · « **Reply #1 on:** July 31, 2012,15:47:07 »

Check this resistence in serial (R-1005,1006,1007,1008)

jamiem1987 · « **Reply #2 on:** August 01, 2012,07:16:06 »

EDIT: Here's the readings with the resistors on the board:

R1005 - .480m ohm
R1006 - .570m ohm
R1007 - .563m ohm
R1008 - .626m ohm

Does this shed any light? Apologies for the inexperience I don't often deal with the DVD repairs.

Mulja tv repair portal · « **Reply #2 on:** August 01, 2012,07:16:06 »

jordan · « **Reply #3 on:** August 03, 2012,03:04:31 »

This resistence is on the part switch -look in SM

jamiem1987 · « **Reply #4 on:** August 03, 2012,07:30:12 »

Forgive me but I don't see any resistance values in the service manual, the parts section only lists very few components, Do you know if the readings I took are good or bad?

Thanks again
Jamie

Keith · « **Reply #5 on:** August 04, 2012,05:01:37 »

Hi,

The component values will be on the schematic

Keith

Mulja tv repair portal · « **Reply #5 on:** August 04, 2012,05:01:37 »

Mulja tv repair portal

News: