Author Topic: Acer LC2416 Analogue Monitor (Read 19174 times)

Turnip · « **on:** October 25, 2012,10:56:39 »

Hi folks,

Have one of these where monitor won't fire up - no led, but 5v present. Power is a FSP100-4F01, and inverter a TDK TBD292LF with 12 trannies. Both inverter fuses OK and no inverter short evident. PS caps look pristine and a bit of heat does now't. Checked S/by tact - OK - All with computer input.

Any thoughts ? - Thanks, Chris.

Mulja tv repair portal · « **on:** October 25, 2012,10:56:39 »

jordan · « **Reply #1 on:** October 25, 2012,12:08:54 »

http://www.badcaps.net/forum/showthread.php?t=9626

Turnip · « **Reply #2 on:** October 25, 2012,12:19:48 »

Hi Jordan,

Thanks, nice one, will go check - Chris.

Later - Checked those caps - values near normal and ESR zero - suspect a 'main board' fault as MB 5v supply is OK but front led doesn't light, with or without signal input.

Mulja tv repair portal · « **Reply #2 on:** October 25, 2012,12:19:48 »

sabre504 · « **Reply #3 on:** February 11, 2013,13:53:26 »

Hi Chris did you ever sort this one ?

Turnip · « **Reply #4 on:** June 30, 2014,11:52:31 »

Hi Sabre,

Sorry took so long to reply, Replaced caps Jordan suggested and monitor booted up. Great picture for a while, then screen became de-focussed and also in slow motion - Screen, I thought - Merde.

Reason I reply today - Just booted it up again, and after a full day - still perfect.

Don't trust it though - Chris.

Mulja tv repair portal · « **Reply #4 on:** June 30, 2014,11:52:31 »

Mulja tv repair portal

News: