Author Topic: Alba LCDW16HDF no HD (Read 4734 times)

Andypandy18 · « **on:** October 28, 2012,06:31:20 »

Have one of these where when HD selected only get blank screen. Worked ok for over 12mths no problem. input ok been tested on another set
I have put an amp in line of HD feed. was better but dropped out after 10 mins intermittantly. Feed works fine on another tv. no dropout,. Any ideas welcome. needed for security purposes.

Dave R

Mulja tv repair portal · « **on:** October 28, 2012,06:31:20 »

Turnip · « **Reply #1 on:** October 30, 2012,12:37:49 »

Hi AP,

Main is perhaps 17MB25-1 - Try Ebay - Chris.

Andypandy18 · « **Reply #2 on:** November 23, 2012,05:40:04 »

Hi Turnip
I do not understand your reply

Mulja tv repair portal · « **Reply #2 on:** November 23, 2012,05:40:04 »

sparky · « **Reply #3 on:** November 23, 2012,07:33:38 »

hi
chris means main motherboard
dave

Keith · « **Reply #4 on:** November 24, 2012,04:23:26 »

Hi,

Possible corrupt data on the HDMI eeprom

Keith

Andypandy18 · « **Reply #5 on:** December 14, 2012,09:07:04 »

How can you reprogram e prom? Does any one know codes?

Mulja tv repair portal · « **Reply #5 on:** December 14, 2012,09:07:04 »

jordan · « **Reply #6 on:** December 14, 2012,14:25:20 »

Chassis 17MB25.1 or 17MB45.3

Mulja tv repair portal · « **Reply #6 on:** December 14, 2012,14:25:20 »

Mulja tv repair portal

News: