Author Topic: PHILIPS 32pfl7603/d STUCK IN STAND BY  (Read 12441 times)

0 Members and 1 Guest are viewing this topic.

buggsy

  • Full Member
  • ***
  • Posts: 44
    • Email
PHILIPS 32pfl7603/d STUCK IN STAND BY
« on: March 21, 2013,10:48:05 »
HI GUYS HAVE A 32pfl7603/d N WITH POWER STAT UP PROBLEM SWICH ON CENTER POWER WHITE LED FLASHES THEN POWERS DOWN THEN 6 FLASHES ON STANDBY LEY INDICATING POWER BOARD FAILURE
CHECKED USUAL SUSPECTS ( FAULY CAPS ) NON FOUND.

ANY IDEA'S WOULD BE HELPFUL....REGARDS..BUGGSY :41:

Mulja tv repair portal

PHILIPS 32pfl7603/d STUCK IN STAND BY
« on: March 21, 2013,10:48:05 »

michael first

  • Hero Member
  • *****
  • Posts: 203
    • Email
Re: PHILIPS 32pfl7603/d STUCK IN STAND BY
« Reply #1 on: July 14, 2013,06:34:22 »
 
 Hi, if it employs a LG display maybe one of the 2 inverter boards is gone.usually the master board gets defective

 specifically the inverter controller.check the 4 mosfets between drain and source.if they measure s.c. replace

 the board .if the master inverter results good check the slave board. 

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: PHILIPS 32pfl7603/d STUCK IN STAND BY
« Reply #2 on: July 14, 2013,08:09:34 »
-unsoldered and check diodes D-630,631,632,633
-resorded joints around regulator on main board
-replaced schottky SR-309
-add resistor (1M) parallel to R-604
-check D04 (BAV70)
Greeting from Slovenia
Jordan Čebron

Mulja tv repair portal

Re: PHILIPS 32pfl7603/d STUCK IN STAND BY
« Reply #2 on: July 14, 2013,08:09:34 »

lemonscampi10

  • Newbie
  • *
  • Posts: 3
Re: PHILIPS 32pfl7603/d STUCK IN STAND BY
« Reply #3 on: March 05, 2014,12:46:50 »
Hi please try this press down the"VOL -" button on the TV itself and the MENU button on the remote, both for 5 seconds. And it should turn on let me know how you get on I have to do this with mine


Mulja tv repair portal

Re: PHILIPS 32pfl7603/d STUCK IN STAND BY
« Reply #3 on: March 05, 2014,12:46:50 »

 

download
download
download
download