Author Topic: hitachi 32LD30U (Read 5887 times)

chrissie jones · « **on:** February 27, 2014,10:38:58 »

When switch on,set hose green.then flashing green and red constant.....help!!!!!

Mulja tv repair portal · « **on:** February 27, 2014,10:38:58 »

sparky · « **Reply #1 on:** February 27, 2014,18:17:55 »

The screen flashes or standby led and what have you checked if any thing

chrissie jones · « **Reply #2 on:** February 28, 2014,03:38:41 »

Standby light flashes mate.

Mulja tv repair portal · « **Reply #2 on:** February 28, 2014,03:38:41 »

sparky · « **Reply #3 on:** February 28, 2014,06:02:45 »

Sounds like mainboard corrupt eeprom

kennyc · « **Reply #4 on:** February 28, 2014,07:53:33 »

Hi chrissie , Had a similar problem on a sanyo 32inch . Complete picture would go green for 2 seconds then red then blue . If its the same there is a problem with the remote . You need a similar remote to free up the tv again once you have done that the old remote should still work

chrissie jones · « **Reply #5 on:** February 28, 2014,08:40:41 »

How do I reset eeprom on this model tv please

Mulja tv repair portal · « **Reply #5 on:** February 28, 2014,08:40:41 »

Keith · « **Reply #6 on:** February 28, 2014,09:22:37 »

I am guessing this is a vestel chassis? 17MB35 ?

Hot plugging HDMI devices causes the HDMI switch to fail (U133) I think! Best to replace the main board.

Keith

ANDRASONI · « **Reply #7 on:** March 01, 2014,07:11:14 »

Try this:

chrissie jones · « **Reply #8 on:** March 01, 2014,11:39:25 »

Thanx for all your help men..but sparky was rite.....corrupt eeprom....Thanx sparky.

Mulja tv repair portal · « **Reply #8 on:** March 01, 2014,11:39:25 »

Mulja tv repair portal

News: