Blaupunkt TV model W23/173I-GB-FHBKUP-DE no sound

[Keith]

Pin 8 is the mute / power on control, it needs to be a minimum of 8.5V for the IC to turn on. You could have a microprocessor fault or corrupt eeprom data causing it to mute.

Keith

[lineofstars]

Thanks Keith.
I just foud the IC datasheet(above link),  wich is not enough.
My question is if you can give me a link from where I can download the hole electonic Diagram service manual of the mainboard T.MSD309.28B 11235 ,the microprocessor and eeprom IC.

[astracat]

try lifting mute pin and put a voltage on it ,do the speakers buzz with a signal on inputs if so try a reset back to manufactory still possible that software corrupted

astracat

[lineofstars]

@astracat
Good idea to reset to the factory state.
never crossed my mind....