Author Topic: Samsung ps50q96 (Read 12249 times)

call me al · « **on:** March 04, 2016,07:53:36 »

Hi all Have this samsung 50" model PS50Q96 Fault no picture vs and va are ok all fuses are ok have checked for shorts on fets and found none,buffer boards look ok is there any way to check buffers to make sure any help much appreciated

Mulja tv repair portal · « **on:** March 04, 2016,07:53:36 »

downunder · « **Reply #1 on:** March 05, 2016,03:52:25 »

Hi Al,

Is the LED on the logic (control) board flashing? Have you tried running test patterns using the pins on the logic board.

Bruce

call me al · « **Reply #2 on:** March 05, 2016,08:16:11 »

Hi Bruce Thanks for reply the light on logic board is on not flashing

Mulja tv repair portal · « **Reply #2 on:** March 05, 2016,08:16:11 »

call me al · « **Reply #3 on:** March 05, 2016,10:29:03 »

SORRY BRUCE ONE OF THE LEDs on logic board is flashing its beside chip u2003 pin 18

downunder · « **Reply #4 on:** March 06, 2016,03:57:03 »

Hi Al,

Disconnect one buffer at a time and see if you get light in the converse half of the screen. If top buffer is kaput, check the screen carefully in sunlight for tiny dark spots. If you find any, I'd be very suspicious od the panel.

re the logic LEDs. I believe one should have a steady constant glow, and one should be blinking, one second on, one second off. Bruce

Mulja tv repair portal · « **Reply #4 on:** March 06, 2016,03:57:03 »

Mulja tv repair portal

News: