Author Topic: Ferguson Help (Read 10059 times)

Fergusson · « **on:** February 17, 2012,07:30:30 »

My tv repairer has fixed some faults that i wanted done but in the process now has another problem where the sound and brightness goes from 0 to full with nothing inbetween .The set has had its battary replaced as part of the work .It is Ferguson Tx 51A3 .It is puzzeling him so i thought i would ask for help.

Mulja tv repair portal · « **on:** February 17, 2012,07:30:30 »

sparky · « **Reply #1 on:** February 19, 2012,10:21:03 »

hi
you will have to go into service mode to set up
cannot remember the red,green,blue,or yellow
buttons to press in what order sorry try and
find service manual
dave

Turnip · « **Reply #2 on:** February 19, 2012,12:37:23 »

Hi,

Being a few days older than Sparky, I seem to recall the backup Nicad drooled down the vertical control panel LHS and corroded most everything beneath - perhaps a modern LCD could be an easier option and would save finding screen clips - Chris

Mulja tv repair portal · « **Reply #2 on:** February 19, 2012,12:37:23 »

dougc · « **Reply #3 on:** February 26, 2012,17:21:53 »

Hi, Can't remember the colours but to enter menu . Coloured buttons from left to right 1>2>4>3. Hope this makes sense, Doug

In_Focus · « **Reply #4 on:** March 01, 2012,14:50:47 »

No coloured buttons, 51A3 is pre Fastext.

To OP do the manual controls on the set work? it sounds like you have a memory problem, to store the settings you need to press the normalise store on the front of the set.

Keith · « **Reply #5 on:** March 02, 2012,05:25:12 »

Hi,

Lots of info on the older TX chassis here http://www.highlandelectrix.fsnet.co.uk/tvs/FERG_TX.TV.html#TX10

TX100 is also there

Keith

Mulja tv repair portal · « **Reply #5 on:** March 02, 2012,05:25:12 »

ximike004 · « **Reply #6 on:** March 19, 2012,21:28:30 »

I need your help.

Fergusson · « **Reply #7 on:** March 23, 2012,17:33:20 »

Quote from: ximike004 on March 19, 2012,21:28:30

I need your help.

WHY ?

Restorer79 · « **Reply #8 on:** March 24, 2012,04:12:56 »

Hi Ferguson: Look closer at the message, it's SPAM to advertise what they sell.

Andy

tv tony · « **Reply #9 on:** March 26, 2012,06:33:56 »

shall we exterminate him, hes getting a pain in the ****

Restorer79 · « **Reply #10 on:** March 26, 2012,15:24:37 »

Hi Tony: Sounds like an excellent idea to me.

Andy

Mulja tv repair portal · « **Reply #10 on:** March 26, 2012,15:24:37 »

Mulja tv repair portal

News: